Paintless dent repair edmond ok

Hello people. Just had a major 14 weeks repair done after a rearend hit and run. As you can see there is some sort of a gap between the bumper and the panel. Is that like ok, or should I go back to them? Also the bumper edge is slightly out. It's like that on both sides. Do I let it go or go back to them?

Kevin Bacon is doing Hyundai commercials § < Sad- > 2023-06-02 17:46
: . . Jeff Bridges used to do them § < sullivan77 > 2023-06-02 17:47
: . . The man's gotta pay the mortgage < Zombie-Fungus > 2023-06-02 17:47-5
on his $15 million house.
: . . I never cared for Kevin Bacon. § < Morgan-LeFay > 2023-06-02 17:47
: . . : . . he's not kosher § < - > 2023-06-02 17:48
: . . : . . : . . LOL § < Morgan-LeFay > 2023-06-02 17:48
: . . joe biden does depends ads § < when-he-aint-falling > 2023-06-02 17:49+1
: . . : . . put a a cork in it, corky § < - > 2023-06-02 17:50+10
: . . There's no shame in commercials < - > 2023-06-02 17:49
Kia Tellurides are super nice too, as long as you get the tow hitch harness fixed
: . . : . . Why would anyone actually tow anything with a < sullivan77 > 2023-06-02 17:51
Kia?
: . . : . . : . . It's a full size SUV more than capable of towing < - > 2023-06-02 17:52
But yea, get that harness fixed before it burns down your house
: . . : . . : . . : . . I'd still not use it to tow anyhing... NOTHING § < sullivan77 > 2023-06-02 17:53
: . . : . . : . . : . . : . . Why? § < - > 2023-06-02 17:54
: . . : . . : . . : . . : . . : . . It's just not................ a vehicle I'd use < sullivan77 > 2023-06-02 17:55
for that purpose. I like me some good 'ol American muscle for that. (Ford F-350.)
: . . : . . : . . : . . : . . : . . : . . Of course you do, because FORD is the acronym < Morgan-LeFay > 2023-06-02 17:56
for Fucked On Road Daily.
: . . : . . : . . : . . : . . : . . : . . : . . My husband and I both drive new Ford trucks. < ItsmeLD > 2023-06-02 17:57
I’m not sure what you are getting at.
: . . : . . : . . : . . : . . : . . : . . : . . : . . It's a just a joke. lol § < Morgan-LeFay > 2023-06-02 17:58
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . No, it's definitely rooted in reality < - > 2023-06-02 18:00
Fords truck lines may be ok but everything else they produce is shit
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . My first car was a Mercury Sable, basically a < Morgan-LeFay > 2023-06-02 18:03
Ford Taurus, and the transmission went out on it after two years. I had a 1991 Ford Explorer and that thing kept falling apart on me to where I started thinking FORD was actually short for Fix Or Repair Daily.
: . . : . . : . . : . . : . . : . . : . . It can tow up to 5,500lbs with its 300 hp engine < - > 2023-06-02 17:57
There's absolutely nothing wrong with towing with a Kia, as long as you get that original harness replaced
: . . : . . : . . : . . : . . : . . : . . : . . Like I said. It's weird and wrong to use it for < sullivan77 > 2023-06-02 17:58
anything other than cruising. And if I see you out there on the road, driving it and pulling something with it, I'm gonna pull you over and we're gonna have some words.
: . . : . . : . . : . . : . . : . . : . . : . . : . . Seems classist to me § < - > 2023-06-02 17:59
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Nope. I'm just helping a troubled soul see reason < sullivan77 > 2023-06-02 18:01
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . He is right. A Kia is like a college < ItsmeLD > 2023-06-02 18:01+5
kid ride. Something inexpensive daddy buys to get his kid around. If you can afford toys that need to be towed, you should be able to afford a proper vehicle to tow them.
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . He's actually not < - > 2023-06-02 18:06 pic
​
https://preview.redd.it/pa4ipuwsa24b1.png?width=640&format=png&auto=webp&s=d6ebb5adbb1df4a98cefc8ef01f85b0d387557cd
A Kia Telluride with all the bells and whistles is a 60k vehicle You seem dumb
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Look at how the rear end of the Kia is sagging < sullivan77 > 2023-06-02 18:07
from the load it's attached to, LMAO!
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . You're complaining about an inch of sag? < - > 2023-06-02 18:13
That trailer was towed 1,500 miles with no problems Jesus, you're a terrible classist
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Funny! The Ford doesn't have tow hitch < sullivan77 > 2023-06-02 18:14
problems and doesn't sag with an even heavier load.
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . They just come with their own set of problems < - > 2023-06-02 18:21

1. Death Wobble
2. Sunroof Leaking
3. PCV Oil Separator Issues
4. Drive Shaft Fracture
5. Engine Ejects Spark Plugs
6. Turbo Hose Blow Off
7. Air Bag Failure
8. Cab Squeaks
9. Front Brake Rotors Warped

I guess FORD really does stand for Fix It Again Tony
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Seems they can still tow a load decently < sullivan77 > 2023-06-02 18:23
without sagging and having hitch problems, which is the focal point of the load being towed. Also, I've NEVER had ANY of those issues with Ford.
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . They do tow wonderfully. My last < ItsmeLD > 2023-06-02 18:25
truck went back and forth to Florida several times pulling a horse trailer with zero issues, even climbing the mountains, it had no problem .
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Correct. I wouldn't use a Kia to pull a horse < sullivan77 > 2023-06-02 18:26
trailer or an RV trailer.
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . All vehicles have issues. That is why you trade < ItsmeLD > 2023-06-02 18:23
it before the warranty runs out. We never have a vehicle not under warranty.
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . At least it's not a Subaru. § < Morgan-LeFay > 2023-06-02 18:07
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . ...And here's what I'm talking about: < sullivan77 > 2023-06-02 18:08 pic
​
https://preview.redd.it/6ubngbtcb24b1.png?width=474&format=png&auto=webp&s=96f94be7d89f031d39c7e73eaaf493554a79c28b
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . You seem poor. § < ItsmeLD > 2023-06-02 18:13+5
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Just when I thought you couldn't get dumber § < - > 2023-06-02 18:15
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Well, arguably you are the dumb one as < ItsmeLD > 2023-06-02 18:19+5
you think a Kia is a good vehicle to tow with. 🙄
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Reading comprehension problems too? Dumb as rock < - > 2023-06-02 18:25
Direct me to the post where I said it's a good vehicle to tow with I merely stated it's capable and that is the truth
: . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . : . . Ok...... 🙄 lol. I’m not going to rub < ItsmeLD > 2023-06-02 18:30
your nose in it. I’ll allow you to bow out with your pride intact.
: . . : . . : . . : . . : . . As somebody who pulls a horse trailer < ItsmeLD > 2023-06-02 17:55
Fairly often, no way I’d use a Kia. Lol
: . . : . . : . . : . . : . . : . . I would use a Dodge Ram. § < Morgan-LeFay > 2023-06-02 17:56
: . . : . . : . . : . . : . . : . . : . . A Dodge Ram is better than a Kia for towing. § < ItsmeLD > 2023-06-02 17:58
: . . : . . : . . : . . : . . : . . : . . : . . 👆 This § < sullivan77 > 2023-06-02 17:58
: . . : . . : . . : . . : . . : . . : . . : . . That's what my grandparents would use for their < Morgan-LeFay > 2023-06-02 18:01
horse trailer. My sister got the truck after my grandmother died though, I wanted that truck, but I had my own Chevrolet Aveo at the time. A Kia and a small Chevy car I think would both not be good for towing.
: . . : . . : . . : . . : . . : . . : . . : . . : . . Yeah, they aren’t. I like something < ItsmeLD > 2023-06-02 18:02
with some power and built to do the job.
: . . : . . at first I thought they looked nice < - > 2023-06-02 17:57
and from certain angles they do, but after the new wears off they look a little ridiculus
: . . Bernie Madoff took his money lol § < - > 2023-06-02 18:14

https://preview.redd.it/qtki6boon14b1.jpg?width=400&format=pjpg&auto=webp&s=73bf8aadba0cda9a39eeb4a52f9943ed73db938f
Ok, I just wanna start by saying, I love the Light Phone, for real. I got my first one almost 3 years ago (rough estimate), and after 2 years, I replaced it with a new Light Phone just to avoid the slowing down that inevitably happens to all phones. I've convinced 3 others to give it a shot (2 stuck, 1 didn't). Seriously, I love it.
That being said the second one worked great when I first got it. The lighting was a little off and I made a post about it but realized I couldn't capture the lighting well on camera. So, I just decided to live with it. But now, after about 5 months, the screen randomly went haywire. It wasn't crushed, the screen protector isn't broken, it didn't get wet, left out in the sun or on the charger. The touch screen still works, I can still unlock it and after 5 minutes was able to play some music. But I can't read anything on the screen.
So honestly, I'm at a bit of a loss as to how this happened or what to do now. :0
I tried restarting it a few times, and I tried letting the battery die to then start it completely fresh (no idea if this would help, but it was literally all I could think of after restarting it).
Does Light Phone offer any sort of repair option or anything? In the meantime I can switch to my old Light Phone, but would definitely not want to stick to it long term as it is super slow after the 2 years of use.
​
side notes I would definitely recommend adding a way to view or export your calendar from the dashboard, as now I have lost everything that was on my calendar without a way to recover it until the phone is fixed. Just a recommendation that never would have occurred to me until now lol.
Also apologies, I did not know if I should flair this as a question or as a bug.
Thanks again! ^_^

I had a full roof replacement from a middle of the road quote for my barn. Lessons learned from reading through this forum after the fact, but they were good at sales and I tried to be very thorough in discussions. This GC gave a 5 year workmanship warranty and the panels are supposed to have 40 years surface warranty.
Job started with sub-contractors only and GC was nowhere to be found. I found this subreddit's recommendation for a roofing consultant and they are coming out this week to go over the roof and make a list. I am genuinely unsure what can be repaired and what has to be redone with new panels and/or new purlins.
Thought this may be a fun set of pictures downselected from many more. Excited to hear opinions on the work and on what you think is a fair resolution. I have paid 1/2 before start and am holding the other half. Total is 50k USD.
My plan now is to let the GC walkaround on Monday and give me feedback. If he says everything looks good, I will say I am having an inspector come out to go over things and put together a list. I wanted to give him a chance to work on anything he sees first though. No payment of the other half until all high priority items are resolved. I am really interested to see if the GC passes it off as complete and great or if he comes to me saying he has more work to do.
Biggest concerns from my limited experience:

1. One thing I really liked during our 5 roof visits (with this GC and team) before purchase was they identified low slope roofs and said they would butyl tape all seams (including laps between panels). Those details separated them from some other quotes, but there was no follow through and there was barely any butyl used. No lap screws either. A lot of the roof is 10 degrees. I have an extra concern that the repair of this critical item may set me up for premature screw replacement and limit my years of use for the metal before I have to do a big tear up. I am thinking I may have to up the screw diameter in less time.
2. Panel damage seems severe at some ribs and the non-continuous panels are red flags for me.. There looks to be a lot of lack of care in the workmanship. It leaves me concerned at what else I can't see.

Torque setting?
A lot going on here. Drip edge may be lapped in the wrong order, no drip edge on the end, Not sure if correct screws were used for drip edge to metal panel. Flashing just stops...
https://preview.redd.it/r3tsgvedz04b1.jpg?width=3024&format=pjpg&auto=webp&s=9585c8cdf9d9514a4b851d16b8a856d20813d8b2
Some of this damage shows through as holes in the roof. Other areas are covered by OSB and I can't tell as easy from inside,
These are shorter runs than other continuous panels. I am thinking they may have cut some long panels in error. to use in another place on the roof.
https://preview.redd.it/rl1je4fdz04b1.jpg?width=3024&format=pjpg&auto=webp&s=dc66fc1aefb8356d1b927a5c7a48fb508c9fa35b
https://preview.redd.it/z9e461fdz04b1.jpg?width=3024&format=pjpg&auto=webp&s=599c9873259dd5c33b1563517a1ff692955f9b8c
Damage on ribs.
Hole on top of rib from dented damage
Lap between panels is curled odd from the inside view.